Butt joint bonding of timber

 The engineers at Timbatec managed to glue timber on the face side. This opens up a whole new world of structural and design-related options that was previously inaccessible to timber constructions


Bonding of beams

 Gluing cross-laminated timber to form beams of any length


Bonding of slabs

 Gluing cross-laminated timber to form slim slabs of any size


Column heads

 Highly stable column heads with breaking loads from 1,100 to 3,100 kN (110 to 310 tonnes)


Floor slabs

 Connecting column heads to ceiling elements to create slim floor slabs


Frame construction

 These new technologies make it possible to construct multiaxial-bearing slim slabs for structural timber elements


High-rise buildings

 The new technologies put the construction of high-rise timber buildings within reach. The structural elements may need to be encapsulated, i.e. clad, with plasterboard depending on national regulations


Shear walls without slippage

 It is now possible to calculate bracing walls as an entire surface with cut-outs. This reduces flexibility and increases rigidity, e.g. for seismic loads


Simple V-structures

 Angled surfaces can also be bonded. This makes it possible to form simple V-structures, for instance


Complex folded plates

 Unfolding makes it possible to create complex folded plates


Bridge construction

 Tiled slab box used in bridge construction


Pipe-shaped modules

 Box modules open at the face side for hotel rooms


Buildings made of curved construction elements

 Curved construction elements can also be bonded, e.g. for troughs, salt silos, masts for wind farms and similar.


3D shell structures

 Biaxially curved shells can be used to construct 3-dimensional shell structures


Free forms

 Free forms are now also possible



 Are you still constructing instead of creating?

Master Builders, Designers and Investors

Timber Structures 3.0 AG


Timber Structures 3.0 AG
Niesenstrasse 1, 3600 Thun
Tel: (+41) 058 255 15 80

Developed by Timbatec

Contact | Legal Notice

  • ArchitekTOUR in the timber cellar - a great success

    ArchitekTOUR in the timber cellar - a great success

    02.09.2021 Line

    Basements made of timber are more environmentally friendly, can be built quickly and offer a pleasant atmosphere. The first basement made of timber in Switzerland was inaugurated and certified as part of the ArchitektTOUR: the timber used is from Switzerland and stores a total of 222 tons of CO2.   

  • School building extension with TS3 technology

    School building extension with TS3 technology

    26.08.2021 Line

    The school building Feld in Richterswil is being extended and renovated at a cost of 7.6 million Swiss francs. Around four million Swiss francs of this will be invested in the two-story addition using TS3 technology. This will create an additional 1,542 square meters of space for class-, group and a music room.   

  • Invitation to the first cellar made of timber

    Invitation to the first cellar made of timber

    23.08.2021 Line

    The BMW15 apartment building in Thun is an innovative showcase project: it is built on the first cellar made of wood in Switzerland, does not require heating and breaks new ground in digital planning. On September 1, we invite you to a guided tour together with the Initiative Holz BE.    

  • TS3 at the lido Hopfräben, Brunnen

    TS3 at the lido Hopfräben, Brunnen

    19.08.2021 Line

    Seemingly weightless, the new TS3 construction roofs the service and changing buildings of the lido in Brunnen. Together with Dettling Holzbau and steinerARCHITEKTUR TS3 invites to a project tour with aperitif - a good opportunity to get to know the technology.    

  • A warm welcome!

    A warm welcome!

    23.07.2021 Line

    With Dario Salzgeber and Dio Lins we could win two new employees for our team.    

  • Construction site aperitif at the TS3 large-scale project

    Construction site aperitif at the TS3 large-scale project

    15.07.2021 Line

    The first four-story apartment building with a column-and-panel construction made of wood is located in Frenkendorf in Basel-Land. More than 60 people have visited the building with TS3 technology.    

  • TS3 long-term test stand removed

    TS3 long-term test stand removed

    21.06.2021 Line

    The TS3 long-term test stand at the Bern University of Applied Sciences has delivered important results for the successful development of TS3 technology and has helped the technology to achieve a market breakthrough. Now it has been dismantled. In keeping with the circular economy, the cross laminated timber boards are being used to create a new object: two box girder elements for heavy-duty bridges.   

  • Construction site aperitif in the highest TS3 building

    Construction site aperitif in the highest TS3 building

    11.06.2021 Line

    The first four-storey column-and-slab construction made of wood was built in Frenkendorf. Thanks to TS3 technology, the building once planned in concrete can be built in wood. We invite you to the construction site tour, TS3 show-pouring and aperitif on 08.07.2021.   

  • The hanging gardens of Zug

    The hanging gardens of Zug

    08.06.2021 Line

    A new innovation quarter is being built in Zug - the Tech Cluster of Zug. In the midst of the new and renovated buildings stands «Semiramis». A tower with five oversized plant bowls made of wood. TS3 and Timbatec are pleased to be part of this lighthouse project.   

  • Switzerland's first cellar made of wood

    Switzerland's first cellar made of wood

    04.06.2021 Line

    Building construction makes a decisive contribution to achieving climate targets if it completely dispenses with steel and concrete. The next logical step is to do without these building materials in basements. Together with Timbatec and other business partners, Timber Structures 3.0 AG has built Switzerland's first basement made of wood in Thun. Now your opinion is needed. Take part in our survey.